Kingston 8GB 1333MHz DDR3 Non-ECC CL9 DIMM Memory (Kit of 2)

Title : Kingston 8GB 1333MHz DDR3 Non-ECC CL9 DIMM Memory (Kit of 2)
ASIN : B002K27KW2
Description : ValueRAM's KVR1333D3N9K2/8G is a kit of two 512M x 64-bit 4GB (4096MB) DDR3-1333 CL9 SDRAM (Synchronous DRAM) memory modules, based on sixteen 256M x 8-bit DDR3-1333 FBGA components per module. Total kit capacity is 8GB. The SPDs are programmed to JEDEC standard latency 1333Mhz timing of 9-9-9 at 1.5V. Each 240- pin DIMM uses gold contact fingers and requires +1.5V.
FEATURES:

JEDEC standard 1.5V ± 0.075V Power Supply.
VDDQ = 1.5V ± 0.075V.
667MHz fCK for 1333Mb/sec/pin.
8 independent internal bank.
Programmable CAS Latency: 5,6,7,8,9,10.
Posted CAS.
Programmable Additive Latency: 0, CL - 2, or CL - 1 clock.
Programmable CAS Write Latency(CWL) = 7(DDR3-1333).
8-bit pre-fetch.
Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4.
which does not allow seamless read or write [either on the fly using A12 or MRS].
Bi-directional Differential Data Strobe.
Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%).
On Die Termination using ODT pin.
Average Refresh Period 7.8us at lower then TCASE 85°C, 3.9us at 85°C < TCASE . 95°C.
Asynchronous Reset.
PCB : Height 1.180” (30.00mm), double sided component.

TECHNICAL DETAILS:

CL(IDD): 9 cycles.
Row Cycle Time (tRCmin): 49.5ns (min.).
Refresh to Active/Refresh Command Time (tRFCmin): 160ns.
Row Active Time (tRASmin): 36ns (min.).
Power: 1.380 W (operating per module).
UL Rating: 94 V - 0.
Operating Temperature: 0o C to 85o C.
Storage Temperature: -55o C to +100o C.





Features :

• Upgrade Type:Generic
• Storage Capacity:8 GB : 2 x 4 GB

List Price : £59.72
Price : £52.00
Saved Price : £7.72

category: DDR3
brand: Kingston
Item Page Detail URL : link
Rating : 5.0
Review : worked straight out of the box
plugged into pq5 mother board, booted and no probs up and running just as it should be ... maybe I was more pleased by the fact that I got the research right and bought the correct memory! ie follow the motherboard recommended memory guidelines.